Stainless steel handrail 1.4301 in grain 240 ground 33,7x2mm with angled wall brackets and cover rosettes.
Depending on the length, the number of brackets on the handrail changes in order to be able to achieve a high level of stability. The following numbers of brackets are provided for the respective length ranges:
|Handrail length 500 to 2000mm
|Handrail length 2100 to 3400mm
|Handrail length 3500 to 4800mm
|Handrail length 4900 to 6000mm
|| 5 holders
Processing and assembly
The brackets of the handrail are firmly welded. The first holder is mounted at a distance of 125mm from the end of the tube. The remaining brackets are then evenly distributed over the rest of the handrail. The screws and dowels required for assembly are included in the delivery, three dowels and three screws for each holder. The end caps are already pre-assembled. If you need the end caps loose with the handrail, please note this in your order.
Bracket height: 75mm
Bracket length: 75mm
Wall distance: 56mm
Diameter of flange plate with cover rosette: 70mm
Diameter of the three drill holes on the flange plate: 7mm each.
The bracket length and bracket height can be changed on request. The holder position can also be changed. Please use our handrail configurator. You can find it here.
Special features and important information
Please note our tolerances of +/- 3mm.
Items sawn or cut to size all fall under the term "custom-made". Please note that we do not grant any revocation for these articles.