Ground anchor round movable V2A ground with Ø6,5mm drill holes for 33,7x2mm handrails

Ground anchor round movable V2A ground with Ø6,5mm drill holes for 33,7x2mm handrails

43,19 €

incl. VAT , from 6,90 € Shipping costs

SKU: 114062
Category: Wall and floor mounting
Manufacturers: rapa GmbH

6 piece In stock
Delivery time: 2 - 5 Workdays (DE - int. shipments may differ)

piece

Stainless steel wall connection with joint for pipe 42.4x2mm, ground V2A

42,15 €

Ground anchor round

Material: stainless steel AISI 304 (V2A)
Surface finish: ground

technical data:

Diameter base plate: 70mm
3 drill holes with 6,5mm diameter each
Diameter on which the drill holes are located: 50mm
Height from lower edge of mounting plate to middle of screw: 29mm
Height from middle of screw to beginning of handrail tube: 21mm

Application:

For Ø33.7x2mm handrail posts.

Scope of delivery

1 piece

Precise material:	Inox AISI 304
Material:	Metal
Application area:	External Internal
Quality:	V2A
Surface:	sanded
Shipping weight:	0,40 kg
Item weight:	0,35 kg

There are no reviews yet.

Manufacturer information:

rapa GmbH

Duisburger Str. 71

Emmerich am Rhein, 46446

Deutschland

gpsr@schmiedekult.de

https://www.schmiedekult.de/

Information on product safety:

Warning notices:

Keep away from other metals! Stainless steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can weaken the metals concerned and impair the stainless steel's non-corrosive properties. In the long term, complete material failure cannot be ruled out.
Risk of rust! This stainless steel has only a low resistance to chemicals and acids in particular. For this reason, we advise against using it in aggressive environments, as this could damage the corrosion protection and lead to material failure. For example, use near pools, in cities with high levels of air pollution and in places in the immediate vicinity of the sea is not recommended!
Follow the care instructions! Please follow the care instructions for the product. If not handled correctly, the stainless steel may lose its rustproof properties.

Installation instructions:

Please note that you will need suitable stainless steel adhesive for installation. The adhesive is not included in the scope of delivery and should be obtained from a specialist dealer.

First make sure that the cut edge of the pipe to be fitted is deburred and that it can be pushed onto the bracket without any problems.
Then anchor the bracket in the wall.
Apply a sufficient amount of stainless steel adhesive to the inside of the pipe end.
Slide the pipe onto the holder.
Ensure that the pipe is aligned as required and fix it in place to prevent it from slipping.
Wait until the stainless steel adhesive has completely hardened.

Care instructions:

Stainless steel must be cleaned and maintained at regular intervals. If this care is not carried out, the material may lose its non-corroding properties. You can use commercially available, non-acidic cleaning agents for cleaning. Please also note that the occurrence of occasional flash rust cannot be ruled out. Flash rust should be removed as quickly as possible to prevent any damage to the material.