Manufacturer information:
rapa GmbH
Duisburger Str.
71
Emmerich am Rhein,
46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Warning notices:
-
Keep away from other metals! Stainless steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can weaken the metals concerned and impair the stainless steel's non-corrosive properties. In the long term, complete material failure cannot be ruled out.
-
Risk of rust! This stainless steel has only a low resistance to chemicals and acids in particular. For this reason, we advise against using it in aggressive environments, as this could damage the corrosion protection and lead to material failure. For example, use near pools, in cities with high levels of air pollution and in places in the immediate vicinity of the sea is not recommended!
-
Follow the care instructions! Please follow the care instructions for the product. If not handled correctly, the stainless steel may lose its rustproof properties.
Installation instructions:
This bracket is designed as a connecting piece between the balusters and the handrail and should only be used in this way and in accordance with the following installation instructions.
- First make sure that the inside of the post tube is sufficiently deburred. Only then can the support be inserted into the tube without any problems.
- Then apply an appropriate amount of stainless steel adhesive to the inside of the tube. The adhesive ensures a secure hold of the handrail support and should be suitable for your application.
- Push the lower end of the support into the post tube as far as it will go.
- Wait until the stainless steel adhesive used has completely hardened.
Care instructions:
Stainless steel must be cleaned and maintained at regular intervals. If this care is not carried out, the material may lose its rust-proof properties. You can use commercially available, non-acidic cleaning agents for cleaning. Please also note that the occurrence of occasional flash rust cannot be ruled out. Flash rust should be removed as quickly as possible to avoid any damage to the material.
